開小型混凝土攪拌車對有經驗的駕駛員來說，一般的駕駛常識都會，在此要提醒的是，由于混凝土是流態的，在車輛急轉彎的時候，要降低速度，以免混凝土轉彎時產生的離心力使車輛不穩！下面為了著想，來了解下更多問題吧。

For experienced drivers, driving a small concrete mixer truck is a common sense. It should be noted here that because the concrete is fluid, when the vehicle turns sharply, the speed should be reduced to avoid the centrifugal force generated when the concrete turns that makes the vehicle unstable! For the sake of safety, let's learn more.

攪拌車上裝指的是什么？

What is the meaning of the mixer truck loading?

攪拌車上裝指的是攪拌車除底盤擋泥板以外的東西，包括攪拌罐體及支座，進出料斗，液壓系統及減速器，水箱及管路，操作連桿機構等。

The upper mounting of the mixer refers to things other than the chassis mudguard of the mixer, including the mixing tank body and support, the inlet and outlet hopper, the hydraulic system and reducer, the water tank and pipeline, the operating linkage, etc.

攪拌車多裝混凝土有哪些影響？

What are the effects of more concrete on mixer trucks?

方以下的攪拌車裝多了混凝土，車子在爬坡過程中會漏灑；12方攪拌車裝多了混凝土，攪拌會分層，混凝土砂率就偏低，石子粒徑偏大，到工地泵送石子多。

The mixer truck below square meters is loaded with more concrete, and the truck will leak during climbing; If the 12 m3 mixer truck is loaded with more concrete, the mixing will be layered, the concrete sand rate will be low, and the stone particle size will be too large, so there will be more stones pumped to the construction site.

新攪拌車一般開幾年就比較容易出問題？

New mixers are more likely to have problems after several years of operation?

拉干料一般是五年，濕料一般是七年，一般攪拌車在3年以后容易出現問題，攪拌車的問題與個人保養及生產廠家有很大的關系。

It takes five years for dry materials and seven years for wet materials. Generally, the mixer truck is prone to have problems after three years. The problems of the mixer truck have a lot to do with personal maintenance and the manufacturer.

混凝土凝固在攪拌車里怎么辦？

What should we do if the concrete solidifies in the mixer?

混凝土凝固后，其主要成分是硅酸二鈣、硅酸三鈣。理論上講，鹽酸可以與之反應解除其固態形狀。但實際上很難操作，因為攪拌車的料口很小，鹽酸量難以控制，且鹽酸也可以與攪拌車罐體發生反應。實際出現這種情況，往往是用電焊或氣割切開罐體，然后將凝固的混凝土機械破碎。

After concrete solidification, its main components are dicalcium silicate and tricalcium silicate. In theory, hydrochloric acid can react with it to remove its solid shape. But in fact, it is difficult to operate, because the mouth of the mixer is very small, the amount of hydrochloric acid is difficult to control, and hydrochloric acid can also react with the tank of the mixer. In fact, the tank body is often cut by electric welding or gas cutting, and then the solidified concrete is mechanically broken.

著想要多了解攪拌車基礎問題的部分內容我們就講解到這里了，您對此有什么疑惑要解答，或者有什么需求要滿足的，都可以來我們網站留言或直接聯系我們http://www.apstzs.com咨詢！

If you want to know more about some of the basic problems of the mixer truck, we will stop here. If you have any questions or needs to meet, you can leave a message on our website or contact us directly http://www.apstzs.com consulting service